Dead End Suspension Insulators

Dead End 15KV - 69KV Silicone Distribution Class Insulators

These 15KV - 69KV Distribution Class Insulators are molded from Silicone Rubber exclusively. The end fitings are made from cast steel, galvanized with a 20,000lb to 30,000lb tensile strength. The fiberglass rod is made from Boron-free E-Glass. This design and range of insulators was introduced to enable ARP to become a cost competitive worldwide supplier of Silicone Rubber Insulators. The 15KV - 35KV insulators all meet the ANSI SML rating of 15,000lbs. Due to the proprietary manufacturing process we use, the ARP-46SKCE-SHP has a 20,200lb SML rating. These insulators have been tested to meet all of the ANSI, IEC and CEA standards. These Insulators are RUS approved (15-46kV).

27KV Silicone Polymer Specialty Horizontal Dead End Insulator (RUS Accepted)

This Insulator was specifically designed for HORIZONTAL APPLICATIONS ONLY to replace "TWO 10" (254mm) Porcelain Disk Assemblies and is molded from our Silicone Rubber compound that offers excellent Hydrophobicity and excellent UB and Ozone resistance. End fittings are made from cast steel, galvanized. The fiberglass rod is made from Boron-Free E-Glass.

Aluminum or Stainless Steel End Fitting 15KV - 35KV Silicone Distributor Class Insulators

These distribution class insulators equipped with either aluminum or stainless steel and fittings are made for use in areas of High Contamination and Corrosive Environments such as coastal areas and in and around factories which very high pollution. the Aluminum version of these insulators has been accepted by RUS. the electrical and mechanical specifications are the same as our standard line of distribution class insulators manufactured with galvanized steel end fittings.